CMC Rescue Rack
The CMC Rescue Rack offers several innovative features to provide enhanced performance. The “fat” aluminum bars provide excellent control for rescue loads. The bars are center drilled to reduce weight and allow better heat dissipation. The finish also prevents transfer of material to the rope, common with bare aluminum bars. The Turbo Bar at the top has a tie-off pin on the side. The second bar has a straight slot to help warn the user of a mis-rigged rack. Since the top two bars do most of the work, they are a full one inch in diameter. The next four angled slot bars are 7/8 inch. The stainless steel frame has a welded eye. The rack comes assembled, ready for use.
CMC’s Rescue Racks have the exceptionally long wearing proprietary finish that is also used on our aluminum Rescue 8s. Whether hard or soft, the surface anodizing on aluminum descenders eventually wears through. Working with a company that specializes in material coatings, we developed a finish for our Rescue 8 and Rappel 8 that outwears every descender we’ve used. After years of heavy use, test samples continue to be used in CMC School classes without showing any indication of the surface wearing through.
- Weight: 794g (1.8lb)
- Length: 381mm (15in)
- Rope Size: 9.5-13mm
- NFPA Rating: General Use
Only logged in customers who have purchased this product may leave a review.
- Figure 8, Tactical Rappelling
- Water Throwline
NFPA Rescue Throw Bag฿4,785.00