Hanger and Bolt Kit, 12mm
The bolt and hanger plate kit is used to create an attachment point for rock climbing and fall protection use in concrete or rock. The bolt and hanger plate are manufactured from stainless steel for outdoor use.
- Bolt Hole Diameter: 12mm
- Main Material: Stainless Steel AISI 316L
- Weight: 142g
- Shear/Perpendicular (YY) MBS: 25 kN
- Tension/Parallel (XX) MBS: 25 kN
- Certification: EN 795:2012-A, EN 959:2007, UIAA-123
- Bolt Size: 12 x 110mm
- Drilling Hole Diameter: 12mm
- Drilling Hold Depth: 120mm
- Torque: 50 Nm
- Rock Type: Soft Limestone, Limestone, Granite
Note: When the anchor is part of a fall arrest system: the user must be equipped with devices which limit the load developed during the fall to 6 kN or less; it is essential for safety that it is always correctly positioned and that work is carried out in such a way as to reduce to a minimum the risk of a fall and the length of a fall.
Warning: If the anchor is deformed or bent in any way, do not use it and substitute it immediately.
Periodic Check: At least every 12 months (6 months for usage in the sea), a rigorous check of the device must be carried out by the manufacturer or expert staff expressly certified by the manufacturer. This frequency can vary depending on the frequency and intensity of usage. Performing periodic checks on a regular basis is essential to ensure the continued efficiency and durability of the device, on which the safety of the user depends.
Only logged in customers who have purchased this product may leave a review.